Bundy Sales-Aftermarket Supplier

Aftermarket Supplier & Manufacturer for 

Engine Rebuilders, Industrial Honing & General Industry since 1988 



Industrial Honing Oil and Tooling
to suit Sunnen Machine

MADE IN AUSTRALIA
COMPETITIVE PRICES AND QUALITY COMPARED WITH O.E.M. PRODUCT.
Interchangeable with Sunnen MB-30 and can be mixed together
BUNDY SALES "HYDRAHONE" is a special purpose, low viscosity, extreme pressure straight honing oil with excellent anti weld properties; removes heat from cylinders during honing; cleans and maintains stones and excellent surface finish.
honing oil
  • ABOUT THE PRODUCTS:
    • Contents: petroleum hydrocarbons; sulphurised animal and vegetables oils; copper corrosion inhibitors and aromatics
    • Packed: 20lt dangerous goods drum - POA;
      200lt steel drum - POA
  • TECHNICAL:
    • Specific gravity: 0.87 at 15°C (S&H); Viscosity: 16cST at 40°C
    • Flash point: 73°C PMCC (AS-S&H); Boiling point: >250°C
    • Chill tested to 4°C; Solubility in water <0.1; Pour point 3C (max)
    • Contains no chlorine; Sulphur content 3.3%; Appearance: dark brown liquid
BSAN-815 PORTABLE HONING PARTS
BSAN-604 BSAN-3A BSAN-650 BSAN-16
BSAN-604 BSAN-3A BSAN-650 BSAN-16
HONE BODY BODY GEAR SET UNIVERSAL JOINT COMPLETE ADJUSTING NUT AND WASHER

25 ID PUSH SPRING RETRACT PRODUCTION HONE HEADS
production hone head
  • NOTE:
    • BS25/G31-37 ID With 6.0 X 66.0 X 63 Hone Stones.
    • BS25/F25-31 ID With 3.8 X 3.8 X 63 Hone Stones.
    • Different size hone stones can be used for other diameters.

BUNDY CODE DESCRIPTIONPRICE $ ea. (incl. GST)
BS25/K 2 of 5/8 UNF Collars-
BS25/G 3 of Stone Holders 31-37 dia. (Stones glue into galv. tray)-
BS25/A 8mm Push Spindle-
BS25/D 3 of Compression Spring (inside)-
BS25/H 5/8 UNF Drive Shaft-
BS25/B 5mm dia. Uni-Joint Shaft (inside)-
BS25/CUBE 1/2 x 1/2 x 1/2 (Drive)-
BS25/C 2 of 2.5 dia. x 10mm Roll Pins (inside)-
BS25/J 4 of 5/16 whit X 7.5 mm Grub Screws-
BS25/E Push-Spring Return Spindle (inside)-
BS25/I 25 dia. Hone Body-
BS25/F 3 of Stone Holders 25-31mm (Stone glue direct)-
BS25/L 6 of 3/16 whit X 3/8 Long Brass Screws-
BS25/GH 3 of 6mm Stone Trays-
BS25/FHS 6 of 6 X 3.8 X 63 Hone Stones (adv. grit required)POA
BS25/GHS 6 of 6 X 6 X 63 Hone Stones (adv. grit required)POA
BS25/PHD COMPLETE SET PRODUCTION HONE HEADPOA

35 ID PUSH SPRING RETRACT PRODUCTION HONE HEADS
  • BS35/PHD (COMPLETE SET - POA):
    • BS35/F 35-41 ID With 6.0 X 66.0 X 63 Hone Stones.
    • BS35/G 41-47 ID With 6.0 X 66.0 X 63 Hone Stones.
    • BS35/M 47-53 ID With 6.0 X 66.0 X 63 Hone Stones.
    • DESIGN THE SAME AS 25MM DIA. HONE HEAD.
top_page

Last Updated November 2014. Copyright 1999-2014 BUNDY SALES®. All rights reserved.